--- End Ad block --->

Product

17kW - 24kW Generac Generator Wire /Generator Purchase Add On (Copper) Part#17aocu

In stock

THIS PRICING IS ONLY AVAILABLE WHEN PURCHASED AND SHIPPED WITH A GENERATOR!  CLICK HERE TO PURCHASE THIS WIRE SEPARATELY!

**Need more than 100' with your generator purchase? Call for pricing: 1-888-294-5537  Max length of 115' recommended

**This Multi Conductor Cable includes the following stranded copper conductors: Three #3AWG - One #8AWG - Nine #18AWG

This is an all inclusive cable that includes all conductors necessary to connect your generator to the transfer switch. We recommend you measure the linear distance between the generator and transfer switch. The exact path the wire will be installed. Add 5' in length for connections within the generator and transfer switch.

**Many jurisdictions across the United States have their own rules, standards and interpretation of the NEC. You are responsible to confirm acceptance by your Authority Having Jurisdiction. See the spec sheet to provide them for approval. There are no returns or refunds once your order has been processed and the wire has been cut.

SALE OF CUT WIRE IS FINAL AND NO RETURNS WILL BE ACCEPTED

Ziller Electric does not endorse this wire being used with a 26kW air cooled generator

Generator 17kW - 24kW Generac Generator Wire Features / Specs:

Click Here To See Spec Sheet

Wire Outer Diameter = .98"

Wire Jacket Print Legend
(UL) E60544-PA POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 3 AWG (26,7 mm2) 3/C + 8 AWG (8,37 mm2) 1/C
GROUND THWN CONDS 75C DRY/75C WET & 18 AWG (0,82 mm2) 9/C TFFN CONDS 600V OIL RES I SUNLIGHT
RESISTANCE DIRECT BURIAL JOIST PULL TCERDirect.com PN TCERJP 1724G+2 "sequential footage print"

Components:

A) (3) - #3 AWG Class C stranded, soft drawn, bare copper circuit
conductors w/40 mils (1.02 mm) heat and moisture resistant,
polyvinyl chloride (PVC) insulation and jacketed w/ 6 mils (0.15
mm) nylon applied directly to the surface of the insulation

B) (9) - #18 AWG Class K stranded, soft drawn, bare copper
conductors w/15 mils (0.38 mm) heat and moisture resistant,
polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils (0.10
mm) nylon applied directly to the surface of the insulation

C) (1) - #8 AWG Class C stranded, soft drawn, bare copper
grounding conductor w/30 mils (0.76 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 5
mils (0.13 mm) nylon applied directly to the surface of the insulation

D) Mylar binder tape

E) 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl
chloride (PVC) jacket. A ripcord shall be placed underneath the jacket

Specifications:                                                                                                                   

Conductors: ASTM B 3, ASTM B 8, ASTM B 174                                                  

Insulation: ICEA S-95-658 (NEMA WC 70), ICEA
S-73-532 (NEMA WC 57), UL 83 for Type THWN
wires                                                                                                                       

Jacket: ICEA S-95-658 (NEMA WC 70), ICEA
S-73-532 (NEMA WC 57), UL 1277

Ratings:                                                                                                           

UL THWN 600V
UL Type TC-ER-JP 600V
The insulation is acceptable for use in locations at 75 °C dry and 75 °C
wet. The cable is suitable for use in cable trays, aerial or direct burial
installations. The cable is JP rated for installation in accordance with
Part II of Article 334.


The 2017 NEC allows this wire to be installed without a conduit or flexible raceway unless subject to physical damage. Consult with your authority having jurisdiction prior to installation.

Associated to Generator Models: 7226, 7228, 7038, 7039, 7042, 7043, 7209, 7210

Description

THIS PRICING IS ONLY AVAILABLE WHEN PURCHASED AND SHIPPED WITH A GENERATOR!  CLICK HERE TO PURCHASE THIS WIRE SEPARATELY!

**Need more than 100' with your generator purchase? Call for pricing: 1-888-294-5537  Max length of 115' recommended

**This Multi Conductor Cable includes the following stranded copper conductors: Three #3AWG - One #8AWG - Nine #18AWG

This is an all inclusive cable that includes all conductors necessary to connect your generator to the transfer switch. We recommend you measure the linear distance between the generator and transfer switch. The exact path the wire will be installed. Add 5' in length for connections within the generator and transfer switch.

**Many jurisdictions across the United States have their own rules, standards and interpretation of the NEC. You are responsible to confirm acceptance by your Authority Having Jurisdiction. See the spec sheet to provide them for approval. There are no returns or refunds once your order has been processed and the wire has been cut.

SALE OF CUT WIRE IS FINAL AND NO RETURNS WILL BE ACCEPTED

Ziller Electric does not endorse this wire being used with a 26kW air cooled generator

Generator 17kW - 24kW Generac Generator Wire Features / Specs:

Click Here To See Spec Sheet

Wire Outer Diameter = .98"

Wire Jacket Print Legend
(UL) E60544-PA POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 3 AWG (26,7 mm2) 3/C + 8 AWG (8,37 mm2) 1/C
GROUND THWN CONDS 75C DRY/75C WET & 18 AWG (0,82 mm2) 9/C TFFN CONDS 600V OIL RES I SUNLIGHT
RESISTANCE DIRECT BURIAL JOIST PULL TCERDirect.com PN TCERJP 1724G+2 "sequential footage print"

Components:

A) (3) - #3 AWG Class C stranded, soft drawn, bare copper circuit
conductors w/40 mils (1.02 mm) heat and moisture resistant,
polyvinyl chloride (PVC) insulation and jacketed w/ 6 mils (0.15
mm) nylon applied directly to the surface of the insulation

B) (9) - #18 AWG Class K stranded, soft drawn, bare copper
conductors w/15 mils (0.38 mm) heat and moisture resistant,
polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils (0.10
mm) nylon applied directly to the surface of the insulation

C) (1) - #8 AWG Class C stranded, soft drawn, bare copper
grounding conductor w/30 mils (0.76 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 5
mils (0.13 mm) nylon applied directly to the surface of the insulation

D) Mylar binder tape

E) 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl
chloride (PVC) jacket. A ripcord shall be placed underneath the jacket

Specifications:                                                                                                                   

Conductors: ASTM B 3, ASTM B 8, ASTM B 174                                                  

Insulation: ICEA S-95-658 (NEMA WC 70), ICEA
S-73-532 (NEMA WC 57), UL 83 for Type THWN
wires                                                                                                                       

Jacket: ICEA S-95-658 (NEMA WC 70), ICEA
S-73-532 (NEMA WC 57), UL 1277

Ratings:                                                                                                           

UL THWN 600V
UL Type TC-ER-JP 600V
The insulation is acceptable for use in locations at 75 °C dry and 75 °C
wet. The cable is suitable for use in cable trays, aerial or direct burial
installations. The cable is JP rated for installation in accordance with
Part II of Article 334.


The 2017 NEC allows this wire to be installed without a conduit or flexible raceway unless subject to physical damage. Consult with your authority having jurisdiction prior to installation.

Associated to Generator Models: 7226, 7228, 7038, 7039, 7042, 7043, 7209, 7210