--- End Ad block --->
Product
Generac G0099540 150 Amp Service Rated Automatic Transfer Switch with Integrated SPD
Generac’s 150 Amp single-phase service NEMA 3R rated automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source.
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker, SPD device and fused control module with brownout protection
Generac G0099540 Details and Features
- Generac’s 150 Amp single-phase service NEMA 3R rated automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source.
- Designed for use with single-phase generators that utilize an Evolution or Power Zone 200 Controller
- Aluminum NEMA/UL Type 3R (indoor-outdoor) enclosure with electrostatically applied and baked power paint provides additional corrosion protection
- Single-phase, 120/240-volt; UL listed transfer switch
- Generac SPD module
- Fused control board with brownout protection
Generac G0099540 Specifications
- Product Length (in.) 13.5
- Product Width (in.) 6.5
- Product Height (in.) 30
- Product Weight (lbs) 39
Click to view Generac owners manual
Description
Generac’s 150 Amp single-phase service NEMA 3R rated automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source.
This automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source. Transfer of electrical loads occurs automatically when the utility power source has failed or is substantially reduced and the generator source voltage and frequency have reached an acceptable level. The transfer switch prevents electrical feedback between two different power sources (such as the utility and generator sources) and, for that reason, codes require it in all standby electric system installations. The transfer switch consists of a transfer mechanism, utility service disconnect circuit breaker, SPD device and fused control module with brownout protection
Generac G0099540 Details and Features
- Generac’s 150 Amp single-phase service NEMA 3R rated automatic transfer switch is used for transferring electrical load from a utility (normal) power source to a generator (standby) power source.
- Designed for use with single-phase generators that utilize an Evolution or Power Zone 200 Controller
- Aluminum NEMA/UL Type 3R (indoor-outdoor) enclosure with electrostatically applied and baked power paint provides additional corrosion protection
- Single-phase, 120/240-volt; UL listed transfer switch
- Generac SPD module
- Fused control board with brownout protection
Generac G0099540 Specifications
- Product Length (in.) 13.5
- Product Width (in.) 6.5
- Product Height (in.) 30
- Product Weight (lbs) 39
Click to view Generac owners manual
