17kW - 24kW Generac Generator Wire / Sold Separately 250' reel (Gray Aluminum) 9 Control Conductors Part#179SSAL250
**This Multi Conductor Cable includes the following stranded Aluminum conductors: Three #1AWG - One #6AWG - Nine #18AWG (stranded copper)
**This is an all-inclusive cable that includes all conductors necessary to connect your generator to the transfer switch. It includes 2 additional conductors that can be used for a remote emergency stop. We recommend you measure the linear distance between the generator and transfer switch. The exact path the wire will be installed. Add 5' in length for connections within the generator and transfer switch.
**The 2017 NEC, allows this wire to be installed without a conduit or flexible raceway unless subject to physical damage. Consult with your authority having jurisdiction prior to installation. Not all jurisdictions consider aluminum conductors an acceptable wiring method. Please confirm with your Authority Having Jurisdiction prior to purchasing this cable.
**250' ORDERS NORMALLY TAKE 7-10 DAYS TO LEAVE FACTORY - THIS IS NO GUARANTEE - WE ARE UNABLE TO PROVIDE TRACKING OR CHECK LEAD TIMES ON 250' ORDERS
**Many jurisdictions across the United States have their own rules, standards and interpretation of the NEC. You are responsible to confirm acceptance by your Authority Having Jurisdiction. See the spec sheet to provide them for approval. There are no returns or refunds once your order has been processed and the wire has been cut.
Additional $75.00 shipping fee may apply for residential or lift gate service on 250' orders
Ziller Electric does not endorse this wire being used with a 26kW air cooled generator
Generator 17kW - 24kW Generac Aluminum Generator Wire / Technical Specs:
Wire Outer Diameter = 1.13"
WIRE JACKET PRINT LEGEND
(UL) E60544 POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 1 AWG AL (42,4 mm2) 3/C + 6 AWG AL (13,3
mm2) 1/C GROUND THWN CONDS & 18 AWG (0,82 mm2) 8/C TFFN CONDS 600V 75C DRY/75C WET OIL RES I
SUNLIGHT RESISTANCE DIRECT BURIAL JOIST PULL GENERAC P/N AL TCERJP 1624G+2 "sequential footage print"
Components
A: (3) - #1 AWG Class B stranded, 8000 series, aluminum conductors w/50 mils (1.27 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 7 mils (0.18 mm) nylon applied directly to the
surface of the insulation.
B: (8) - #18 AWG Class K stranded, soft drawn, bare copper conductors w/15 mils (0.38 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils (0.10 mm) nylon applied directly to the
surface of the insulation.
C: (1) - #6 AWG Class B stranded, 8000 series, aluminum conductor w/30 mils (0.76 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 5 mils (0.13 mm) nylon applied directly to the
surface of the insulation
D: Mylar binder tape.
E: 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl chloride (PVC) jacket. A ripcord shall be placed
underneath the jacket.
Associated to Generator Models: 7226, 7228, 70381, 70391, 7042, 7043, 7209, 7210
Description
**This Multi Conductor Cable includes the following stranded Aluminum conductors: Three #1AWG - One #6AWG - Nine #18AWG (stranded copper)
**This is an all-inclusive cable that includes all conductors necessary to connect your generator to the transfer switch. It includes 2 additional conductors that can be used for a remote emergency stop. We recommend you measure the linear distance between the generator and transfer switch. The exact path the wire will be installed. Add 5' in length for connections within the generator and transfer switch.
**The 2017 NEC, allows this wire to be installed without a conduit or flexible raceway unless subject to physical damage. Consult with your authority having jurisdiction prior to installation. Not all jurisdictions consider aluminum conductors an acceptable wiring method. Please confirm with your Authority Having Jurisdiction prior to purchasing this cable.
**250' ORDERS NORMALLY TAKE 7-10 DAYS TO LEAVE FACTORY - THIS IS NO GUARANTEE - WE ARE UNABLE TO PROVIDE TRACKING OR CHECK LEAD TIMES ON 250' ORDERS
**Many jurisdictions across the United States have their own rules, standards and interpretation of the NEC. You are responsible to confirm acceptance by your Authority Having Jurisdiction. See the spec sheet to provide them for approval. There are no returns or refunds once your order has been processed and the wire has been cut.
Additional $75.00 shipping fee may apply for residential or lift gate service on 250' orders
Ziller Electric does not endorse this wire being used with a 26kW air cooled generator
Generator 17kW - 24kW Generac Aluminum Generator Wire / Technical Specs:
Wire Outer Diameter = 1.13"
WIRE JACKET PRINT LEGEND
(UL) E60544 POWER AND CONTROL TRAY CABLE TYPE TC-ER-JP 1 AWG AL (42,4 mm2) 3/C + 6 AWG AL (13,3
mm2) 1/C GROUND THWN CONDS & 18 AWG (0,82 mm2) 8/C TFFN CONDS 600V 75C DRY/75C WET OIL RES I
SUNLIGHT RESISTANCE DIRECT BURIAL JOIST PULL GENERAC P/N AL TCERJP 1624G+2 "sequential footage print"
Components
A: (3) - #1 AWG Class B stranded, 8000 series, aluminum conductors w/50 mils (1.27 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 7 mils (0.18 mm) nylon applied directly to the
surface of the insulation.
B: (8) - #18 AWG Class K stranded, soft drawn, bare copper conductors w/15 mils (0.38 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 4 mils (0.10 mm) nylon applied directly to the
surface of the insulation.
C: (1) - #6 AWG Class B stranded, 8000 series, aluminum conductor w/30 mils (0.76 mm) heat and moisture
resistant, polyvinyl chloride (PVC) insulation and jacketed w/ 5 mils (0.13 mm) nylon applied directly to the
surface of the insulation
D: Mylar binder tape.
E: 80 mils (2.03 mm) of heat and moisture resistant, polyvinyl chloride (PVC) jacket. A ripcord shall be placed
underneath the jacket.
Associated to Generator Models: 7226, 7228, 70381, 70391, 7042, 7043, 7209, 7210